TurboCADCAM will customize the G&M code files to specific machine operating parameters.  The specific machine parameters are stored in a .gcs file. All of the .gcs files are stored in one directory for TurboCADCAM.  Put the file Tormach.gcs into the directory:

\Program Files\IMSI\TCWP11\CAM\CodeSystems

Once this is done, Tormach will show up as a machine selection option, just as does Haas, Fanuc, and Fadal.

In legacy systems this is known as a Post, or Post Processor, because the CAM output file was processed to create the G&M code file after the CAM file was created. TurboCADCAM creates the G&M codes at the same time, not after the fact.